Finally a quality product that will fit first time,strong and durable that will last in 4x4 Off-road applications. Easy fitment suitable for the everyday 4x4 Driver.
8mm laser cut mild steel brackets with support gussets.
3mm wall 2” square and round tube
5 X 3mm wall 1 ¾” Laser cut notched round spacers joining the rails
Front mount is 3mm heavy wall capped square tube with 2 mounting holes. Increased strength and stops mud getting in. Assembled on a Jig. Consistent quality Product.
Professionally Sand Blasted
Professionally Powder coated Black
All Bolts (10mm), nuts, flat & spring washers supplied (Hi-tensile 8.8)
EASY TO FIT!
The Sliders have been developed with the home handy man in mind. They can be easily fitted at home with No specialized tools required.
Bolt up design, All mounts on our sliders are bolt up. NO WELDING REQUIRED
Note, 2 holes needing to be drilled on each side to be mounted, pre-drilled mounts mean you just have to put your drill through our holes and use them as a guide.
There are no chassis modifications required unlike other ‘weld on’ designs.
LOCATION ON VEHICLE
The base square tube runs directly under the factory body join. We have found that the square tube is much better at carrying the weight and does not bend/dent as easy as the round tube.
The outer pipe is 2" 3mm heavy wall pipe, with the end angle cut to blend in nicely with the original body flares.
We have kept them up high and in close so you don't get hung up on them when 4WDing. They do come out far enough to get a foot on so they can also be used as a step.
|Unit Of Measure||1|
Be The First To Review This Product!
Help other 4blok pty ltd users shop smarter by writing reviews for products you have purchased.